Hotline0964 73 74 73 VIEN Talk to us

Dan choi dan ca night 2 in Hanoi, 7 Nov: guests and setlist

Night 2 of Phương Mỹ Chi's Dân chơi dân ca music night took place in Hanoi on 7 November 2026, with RHYDER, Pháo, Double2T and Xoan singing artisans.

Concerts & entertainmentNov 10, 20264 min read
Dan choi dan ca night 2 in Hanoi, 7 Nov: guests and setlist

On the evening of 7 November, singer Phương Mỹ Chi brought her "Dân chơi dân ca" music night to Hanoi. It was the second night of the series, after the first one in Ho Chi Minh City in October, and her first headline show in the north. Tuổi Trẻ, Thanh Niên and Dân Trí all covered the night.

The most talked-about segment was "Thử lòng quân tử", in which artisans from four original Xoan singing guilds of Phú Thọ performed an excerpt of "Xin huê đố huê" on a pop concert stage. Nguyễn Thị Lịch, head of the An Thái Xoan guild, played the large drum herself. RHYDER joined that number, then sang "Bóng phù hoa" with Phương Mỹ Chi, a segment in which both performers were lifted into the air on a wire system.

The show was built around three legs covering the north, centre and south. The Hanoi edition differed from the Ho Chi Minh City one in several places: People's Artist Thanh Ngoan sang "Xây xẩm" with Phương Mỹ Chi, Phương Ly appeared in "Nữ công gia chánh", and a cyclo moved around the stage during the remix of "Thiên đường với người thương".

Key information

ItemDetail
Show"Dân chơi dân ca" music night, night 2
DateEvening of 7 November 2026
LocationHanoi; reports did not name the venue
Guests named in reportsPhương Ly, Pháo, RHYDER, Double2T, Bảo Định, Nguyễn Hùng, People's Artist Thanh Ngoan, artisans of four Xoan guilds from Phú Thọ
TicketsReports did not publish ticket prices or tiers

Details that sources do not agree on, such as running time, audience numbers or the venue name, are left out of this article.

Indoor stage with truss frame and a central LED screen
Illustrative photo of stage work, not a photo of the show in this report

A production view: staging, audio and lighting, LED screens, crowd operations

A night that mixes traditional instruments with an electric band and includes a flying segment gives the technical crew plenty to solve. What follows is how the trade generally plans such work, not a description of the show above.

Flying performers is the strictest part of the job. Load calculations for a person use a higher safety factor than loads for equipment, the pick points come from structure that has been checked rather than from a lighting truss, and every wire, pulley and turnbuckle carries inspection paperwork. Rigging crews run the move repeatedly with sandbags before anyone goes up, keep a spotter on the deck and prepare a manual lowering plan for a power loss.

Audio for traditional instruments is harder than for a standard band. The đàn tranh, đàn nhị, large drum and bamboo flute are quiet, sensitive sources that feed back easily when stage monitors run loud. The usual approach is in-ear monitors for the performers, less floor wedge level, microphones chosen per instrument and separate gain groups so the engineer can move quickly between numbers. Where singers perform live over heavy choreography, wireless microphones need spare channels and a battery change mid-show.

Indoor LED screens for a music night usually use a small pixel pitch, because the front rows sit close. Content has to be built at the screen's real pixel size rather than stretched from a 16:9 video. Brightness stays moderate; pushed too high, cameras read flat colour and nearby seats are dazzled. When large objects cross the stage, such as a moon piece, a silk drape or a cyclo, the LED content works better on a darker base so the object keeps a visible edge.

Lighting follows the script number by number. Moving heads are programmed into cues and the operator fires them against the rehearsal, rather than improvising. A flying segment needs its own follow spot and care to keep beams out of the eyes of anyone suspended.

When a performer goes down into the audience, the crew prepares the route in advance: soft barriers, a security escort and one follow light. That route is also an escape route, so cables, flight cases and speaker stands stay clear of it.

Close-up of a technician in headphones working an audio mixing desk at an event
Illustrative photo of event audio work

Notes for the audience

The 7 November night has taken place. As of writing, no report has announced a further night in the series, although many people asked for a third one on the singer's own page. Anyone hoping for a later date should follow the show's official channels and buy only from the announced seller.

A band performing on an indoor LED stage
Illustrative photo of stage and LED screen work

Frequently asked questions

When and where was night 2 of Dân chơi dân ca held?

Night 2 took place on the evening of 7 November 2026 in Hanoi. The reports covering it did not name the venue.

Who performed at the show?

Reports named Phương Ly, Pháo, RHYDER, Double2T, Bảo Định, Nguyễn Hùng, People's Artist Thanh Ngoan and artisans from four original Xoan guilds in Phú Thọ, with Nguyễn Thị Lịch on the large drum.

Has a further night been announced?

No. At the time of writing, no source has published a date or venue for another night.

Conclusion

Nights that put folk material on a modern stage depend on the technical side hitting every cue, and that is the daily work of Hoàn Vũ in staging, LED screens, audio and lighting, and livestreaming for event production.

Dan choi dan ca night 2Phuong My Chi Hanoi concertVietnam concert November 2026Xoan singing on stageRHYDER Bong phu hoa
Planning a live show or livestream?

Hoan Vu handles stage, screens, filming, streaming and ticketing end to end.

Talk to us